Semtech GS12281 UHD-SDI Cable Driver

Author : Semtech Published Time : 2017-07-15
Semtech GS12281 Ultra High Definition (UHD)-Serial Digital Interface (SDI) Cable Driver is a low power, multi-rate, and a retiming device which supports data rates up to 12Gbps. This cable driver is designed to receive 100Ω trace input signals and transmit the re-timed signal over 75Ω coaxial cables. The 100Ω trace input supports up to 17dB of insertion loss. The GS12281 cable driver features dual non-inverted 75Ω cable interface with on-chip termination. This cable driver offers an integrated eye monitor which provides non-disruptive mission mode analysis of the post-equalized input signal. The 256 x 128 resolution scan matrix allows accurate signal analysis and enables field analysis.

Features

Dual non-inverted 75Ω cable interface with on-chip terminationSMPTE ST 2082-1, ST 2081-1, ST 424, ST 292-1, and ST 259 compliant input/outputMulti-standard operation from 1Mbps to 11.88Gbps3D input signal eye monitorCable driver modes:Wide swing controlPre-emphasis to compensate for significant insertion loss between device output and Bayonet Neill–Concelman (BNC)Automatic/manual output slew rate controlManual or automatic re-timer bypassManual or automatic mute or disable on Loss Of Signal (LOS)Clock Data Recovery (CDR)

Applications

UHDTV1 and UHDTV24K D-Cinema and 3D High Frame Rate (HFR)High Dynamic Range (HDR) production image formatsCameras and switchersDistribution amplifiers and routers

Specifications

Single 1.8V power supply for analog and digital core2.5V or 3.3V for cable driver output supplyGennum Serial Peripheral Interface (GSPI) serial control and monitoring interface-40°C to 85°C operating temperature range6mm x 4mm 40-pin Quad-Flat No-Leads (QFN) package
Semtech Newest

Semtech Smart Building Reference Kits are designed to provide validation of the network coverage within a building and accelerate solution development.

Date: 2019-09-23

Semtech SX1250 Multi-band Sub-GHz RF Front End is designed to work with SX1302 baseband engine, to design a high-performing LoRa® or LoRaWAN gateway.

Date: 2019-09-13

Semtech SX1302 LoRa® Gateway Baseband Transceivers reduce current consumption and simplify the thermal design of gateways while decreasing BOM costs.

Date: 2019-09-13

Semtech µClamp2492SQ Electrostatic Discharge Protection Device (ESD) is designed to provide robust ESD protection on Automotive CAN bus nodes.

Date: 2019-02-22

Semtech nanoSmart SC573 300mA Low-Noise LDO Regulator is designed to target applications for Internet of Things (IoT) sensors, such as including Semtech LoRa Devices & Wireless Radio Frequency Technology (LoRa Technology).

Date: 2019-02-12

Semtech SMBJxxCA Transient Voltage Suppressors feature large cross-sectional area junctions for conducting high transient currents.

Date: 2018-12-19

Semtech LKCH-TXRX40W-EVB is a wireless charging solution that includes one transmitter and one receiver.

Date: 2018-11-13

Semtech SX1308 LoRa® PicoCell Gateway (GW) Networking Modules are the multi-channel high-performance transceivers, designed to simultaneously receive several LoRa® packets using random spreading factors.

Date: 2018-11-06