Tinkerforge Bricks
Tinkerforge Bricks are stackable microcontroller modules for sensing and controlling embedded application prototypes. These Bricks can be controlled by devices, such as embedded PCs, over their Mini-USB connector. Each 4cm x 4cm Brick performs one task. There are Bricks that perform complex sensor tasks, Bricks that communicate with other devices, Bricks that drive motors, and more. Tinkerforge Bricks can be assembled into stacks to combine functions.
Products Available
DC Brick
Controls one DC brushed motor (max. 28V and 5A (peak) over USBDebug Brick
Adds JTAG and Serial Console Debug capabilities to Bricks, Bricklets, and StacksIMU 2.0 Brick
Full-fledged IMU (Inertial Measurement Unit)/AHRS (Attitude and Heading Reference System) with 9 degrees of freedom (3-axis each: accelerometer, compass, gyroscope)Master Brick
Basis to build Brick Stacks, features 4 Bricklet portsRED Brick
Rapid Embedded Development (RED) Brick executes user programs and controls other Bricks/Bricklets standaloneServo Brick
Controls up to 7 RC servos with a maximum current of 3A over USBSilent Stepper Brick
Silently controls one bipolar stepper motor with a maximum current of 1.6A and a maximum voltage of 46V per phase over USBStepper Brick
Controls one bipolar stepper motor with a maximum current of 2.5A and a maximum voltage of 38V per phase over USB
Controls one DC brushed motor (max. 28V and 5A (peak) over USBDebug Brick
Adds JTAG and Serial Console Debug capabilities to Bricks, Bricklets, and StacksIMU 2.0 Brick
Full-fledged IMU (Inertial Measurement Unit)/AHRS (Attitude and Heading Reference System) with 9 degrees of freedom (3-axis each: accelerometer, compass, gyroscope)Master Brick
Basis to build Brick Stacks, features 4 Bricklet portsRED Brick
Rapid Embedded Development (RED) Brick executes user programs and controls other Bricks/Bricklets standaloneServo Brick
Controls up to 7 RC servos with a maximum current of 3A over USBSilent Stepper Brick
Silently controls one bipolar stepper motor with a maximum current of 1.6A and a maximum voltage of 46V per phase over USBStepper Brick
Controls one bipolar stepper motor with a maximum current of 2.5A and a maximum voltage of 38V per phase over USB
Tinkerforge Newest
Tinkerforge HAT Zero Brick is a Raspberry Pi HAT with the standard Raspberry Pi Zero HAT form factor.
Date: 2019-08-29Tinkerforge HAT Brick for Raspberry Pi follows the HAT specification and will automatically and without any changes work with Raspbian.
Date: 2019-08-29Tinkerforge Bricks are stackable microcontroller modules for sensing and controlling embedded application prototypes.
Date: 2019-07-08Tinkerforge Bricklets are compact modules designed to extend the features of Tinkerforge Bricks, adding sensors, I/O, Human Machine Interface (HMI), and more.
Date: 2019-07-08